Lock it. Bend it. Repeat it.
A wire bending unit with an attached adjustable jig head. Lock a size on the built-in rail scale and repeat it with no drift, bend after bend.
$55
Launch list members get 10% off with the code sent in the launch email, $49.50 before shipping.
Flat $6.50 shipping in the US, 3 to 5 business days. US shipping only at launch.
Ships assembled, with the 5 mm pin plate installed and the wrench tool included, plus access to the digital bend library and a vinyl Symbion sticker in the box.
Printed in small batches by Tucker, about 3 units a day max. Orders ship in the order received.
Sold out, or not ready yet? Join the list for restocks.
Adjustable Length
One side bends. The other is a jig that holds your first loop in place while you bend the second. Adjusts from 45-200 mm. Set the length once, then repeat it across a batch.
Clean, tight bends
Wire sits in the 2 mm pin gap between the center pin and rotating pin. The oversized knob underneath gives you leverage for a tight wrap.
Barrel wraps
The included wrench tool finishes the barrel wrap, the bend that completes a through-wire lure.
Hardware
Three threaded stainless pin dowels (M5). One at the jig end, two at the bending end. 5 mm pin plate installed. M2, M3 and M4 pin plate kits coming in January.
Printed in ABS
Body and locking pawls are 3D-printed in ABS. At rest, each pawl's tooth sits engaged in the rail, locking the head in place. Pinch both pawls to flex the teeth clear, slide to size, release, and the ABS springs straight back to lock.
Wire: 1.2 mm spring wire
Made for 1.2 mm fully hardened stainless steel spring wire. Soft wire bends fine to 1.6 mm. 2 mm gap between pins.